Luxury Fiberglass Pool Articles

Salt chlorine generators are a fantastic part of any pool. They are not without maintenance however. Depending on the usage of your unit, the life expectancy of certain components could vary quite a bit. The amount of chlorine you need and the system makes, could potentially wear out a system in just a couple short years. This can be avoided by keeping your water chemistry balanced, maintaining proper salt levels, and not allowing your pool to 'get behind' on chlorine, requiring your generator to run full blast for days or weeks. Remember just because you make your own chlorine doesn’t mean you don't need to use liquid chlorine or other supplemental sanitizer- you should be. Read More...

There are occasionally times when you might notice a small drip coming from your 'drain to waste' (DTW) or 'cleaner' valve. This is not uncommon or really a problem. Read More...

White or cloudy areas on a decorative concrete patio can be caused by a few different things. The most common cause is the use of incompatible sealer. When most professionals seal decorative concrete we use a solvent based sealer. Due to VOC laws, hazmat rules, and costs, these can be hard to obtain unless you're in the trade, but they are best. Read More...

An Automatic cover makes a fantastic winter cover. It keeps the dirt out, the sun out, is safe, and looks nice. There are however some things to keep in mind, and attention should be paid to your cover though winter. Read More...

In addition to cracks occurring in the curing process, cracks also can occur from ground movement – up or down. Some of this movement happens as a result of ground shifting, water flow and erosion, settling, and or the ground freezing in the winter and pushing the slab up. Through metal reinforcement and strategically placed relief joints most of these cracks can be kept in the joints and visually not be 'cracks.' If a crack shows up in the joint – then the joint or cut did its job. Sometimes it doesn't. Sometimes cracks do what they want. Such as cracking right next to a relief joint. A bigger and more troublesome concrete issue is spalling or popping. Read More...

In certain situations pool water can be so dirty that the water is not worth filtering or simply cannot be filtered clean. These situations are often related to a pool being left open during the winter, the construction process, a flooding event, or an extreme algae infestation. Read More...

It is not uncommon for the drain to waste valve to develop a small leak and drip onto the equipment pad. They need occasional lubricant applied (magic lube silicone grease) the same as any O ring or seal on your pad does. Read More...

It is not uncommon to experience air in your pump at some point. Obviously there is going to be air in the pump when you open your pump to service your system or when you first open the pool and are purging the lines from winterization. Excluding air from those events air entering your pump is related to some sort of air leak or a low water level. Here are some things you can check to eliminate an air leak. Read More...

As much as we look for 'maintenance free' products, everything needs some level of maintenance. Wood decks, paver patios, and even concrete. Concretes primary maintenance task is sealing. It should be sealed about every 1.5 to 2 years. Many concrete contractors recommend sealing decorative concrete every year because it DOES look nicer and definitely protects the concrete. If we were talking about concrete anywhere else except around a pool I would agree. Sealer when applied annually can build up and become very slippery and possibly dangerous. Read More...

Fall can be a sad time for pool owners as we think about shutting down our pools and hunkering in for winter. It can be easy to neglect your pool once the swimming season is over, but it is important to resist the urge to ignore your pool before it has been winterized and closed. Read More...